Runt rör

To cut round tubes without damaging them, use a jeweller’s saw with fine teeth saw blades. Secure the tube in a vice or clamp, and cut slowly with steady pressure. For precise results, ensure the blade is sharp and lubricated and use a guide to maintain a straight cut.

Jewellery tubes are available in a variety of sizes, typically ranging from 1mm to 10mm in inner diameter..

Incorporate jewellery tubes into ethical jewellery designs by choosing tubes made from recycled or responsibly sourced metals. These materials reduce environmental impact and align with sustainable practices, allowing you to create beautiful jewellery that supports ethical values.

The best way to solder round tubes is to use a steady heat source, such as a torch, and apply solder evenly at the joint. Flux the area first to promote smooth solder flow, and heat the tube evenly to ensure a strong, clean join without overheating.

Yes, round tubes can be used to create bezels in jewellery. They are great for setting round stones, as they can be cut to size and shaped to fit the stone, providing a secure and aesthetically pleasing setting.

To polish round tubes, use progressively finer polishing compounds and buffing wheels. Start with a rough polish to remove scratches, then move to finer compounds for a mirror-like finish. Ultrasonic cleaning can also help remove residue and enhance shine

Round tubes offer a smooth, cylindrical shape, ideal for creating flowing lines and round components like ring shanks and bezels. Square tubes provide angular edges, which are better suited for modern or geometric designs, offering a different aesthetic and structural strength.

No, round tubes are generally too large to be used as earring posts. Earring posts are typically 0.8mm in diameter, which is much smaller than most round tubes. Instead, solid wire or pre-made earring posts are used to create earrings for a secure and comfortable fit.

The most durable materials for round tubes in jewellery are gold alloys (such as 9ct or 18ct gold) and sterling silver. These materials provide strength, resistance to tarnishing, and longevity, making them ideal for high-quality, long-lasting jewellery pieces.

To ensure precision when cutting round tubes, use a fine-toothed jeweller’s saw or tube cutter, and secure the tube in a clamp or vice. Mark the cutting line clearly and cut slowly with consistent pressure. Use a guide or jig for perfectly straight cuts.

Yes, round tubes are versatile and can be used in both modern and traditional jewellery designs. Their clean, smooth lines suit contemporary styles, while their adaptability makes them ideal for classic designs like bezels, ring shanks, beads and decorative elements.

Runda rör från Ore Metals är otroligt mångsidiga och kan användas för att tillverka ett brett utbud av smycken. De är perfekta för att göra eleganta gångjärnskomponenter i armband och halsband , anpassade ramar för unika ädelstensinställningar i ringar och hängen , eller som strukturella element i moderna, geometriska örhängen.

Våra högkvalitativa rör säkerställer hållbarhet och en professionell finish för både intrikata specialanpassade smycken och mer omfattande smyckesdesigner.

To form round tubes into complex shapes, use forming tools such as mandrels, pliers, and stakes. Anneal the metal to increase its pliability, then gradually shape the tube, applying even pressure to avoid kinks or deformation. For intricate shapes, use specialised jigs or molds.

Yes, brass round tubes are suitable for jewellery making. Brass offers a warm, golden hue at a lower cost than gold, making it a popular choice for decorative elements and structural components. It is durable, easy to work with, and can be polished to a high shine.

Att välja rätt metalltyp för ditt runda rör beror på designen och funktionaliteten hos ditt smycke.

Sterling silver är utmärkt för vardagssmycken med hög glans, medan alternativ i 9 karat guld ger en lyxig touch som lämpar sig för exklusiva kreationer.

Runda rör i mässing och koppar är bra för övning eller att skapa stycken med en vintagekänsla. Tänk på metallens formbarhet , färg och det slutliga utseende du vill uppnå när du gör ditt val.

För personlig rådgivning är vårt team på Ore Metals redo att guida dig utifrån dina specifika behov och preferenser.

In mixed-metal jewellery designs, round tubes can be used to create contrast and visual interest. Combine different metals, like silver and gold, by incorporating round tubes into the design. Soldering can be used to join different metals seamlessly.

Store jewellery making round tubes in a dry, cool environment to prevent tarnishing or oxidation. Keep them in a compartmentalized box or tube holder to avoid scratching or bending. For precious metals, consider using anti-tarnish strips or cloths.

Yes, round tubes are ideal for ring designs, especially for creating seamless, smooth shanks or decorative elements. They can be cut and shaped to fit the design, and offer the strength needed for durable, comfortable rings.

After soldering, clean round tubes using a pickle solution to remove oxidation and flux residue. Rinse thoroughly and polish with a polishing cloth or compound to restore the tube’s shine. Ultrasonic cleaners can also be used for a deeper clean.

Gold round tubes offer luxury, durability, and resistance to tarnishing. They provide a rich, warm tone that enhances the value of the jewellery, and are ideal for high-end designs that require long-lasting, high-quality materials.

To achieve a patina on silver round tubes, use a patina solution like liver of sulphur. There are multiple techniques available to achieve a range of effects e.g. Submerge the tubes in the solution, then rinse and polish to achieve contrasting or complementary shades or patterns. Patinas add depth and contrast, enhancing the visual appeal of the piece.

Yes, round tubes can be used for structural components in jewellery. They provide strength and stability, making them ideal for ring shanks, bracelet frames, hinge components and other elements that require durability while maintaining a sleek, polished look.

To set gemstones in round tubes, cut the tube to the appropriate height and file the edges smooth. Insert the stone, ensuring a snug fit, and gently push the edges of the tube over the stone with a bezel pusher or burnisher to secure it in place.

Yes, round tubes can be resized by cutting them to the desired length or stretching them slightly if needed. However, care must be taken to maintain the tube’s structural integrity and avoid thinning or deforming the metal.

Common issues when working with round tubes include kinking during bending, uneven cuts, and difficulty in soldering if the fit is not precise. To avoid these, ensure proper tools and techniques are used, and always measure and mark carefully before cutting or shaping.

Create custom shapes with round tubes by using forming tools like mandrels, pliers, and jigs. Anneal the metal first to make it more malleable, then shape it gradually, applying even pressure. For complex shapes, consider using a tube-bending machine or laser cutting.

The best solder for joining round tubes is a solder that matches the metal of the tube to ensure a seamless finish. E.g. silver solder for silver tubes. Apply flux to the joint and heat evenly for the best results.

Measure the internal diameter of round tubes using a vernier calliper or an inside micrometer. Insert the measuring tool into the tube and gently adjust it until it fits snugly. Read the measurement on the tool to determine the precise internal diameter. This method ensures accurate measurements, which are crucial for fitting components or setting stones.

Yes, round tubes can be used in wire-wrapped jewellery as structural elements or decorative components. They can add dimension and stability to the design, especially when combined with wire of varying gauges. Use thinner tubes for finer details and thicker tubes for more robust, structural parts.

Seamless round tubes are made from a single piece of metal without any joints or seams, providing superior strength and a smooth appearance. Seamed tubes are created by joining two edges together, which may have a visible seam and slightly lower structural integrity. Seamless tubes are preferred for high-quality, precision work, while seamed tubes are more cost-effective and suitable for less demanding applications.

Ethical round jewellery tube can be purchased from suppliers like Ore Metals who specialise in recycled metals and sustainable jewellery-making supplies. Look for statements from suppliers that confirm their commitment to ethical sourcing and environmentally friendly practices.